Heat and pressure equipment —
for industrial use.
Each solution is designed and manufactured to meet the specific requirements of the customer's process. From electric boilers to heat exchangers, oil pump units to sample processing — seven product areas under one roof.
We meet your needs with
comprehensive service.
With over 30 years of experience in engineering, manufacturing and commissioning, we can provide complete deliveries including electrical and automation installations, commissioning, spare parts services and maintenance.
Tailored solutions and in-house design
Electrical and automation installations
Implementation
Spare parts and maintenance service
Leasing option available for selected products
Finished steel structures for support structures of pressure equipment
Boilers
Electric boilers 250 kW – 80 MW for steam and hot water. Power-to-Heat solutions for Finnish energy operators.
Electric boiler for steam production
An electric steam boiler is a compact and environmentally friendly solution for steam generation, requiring no chimney and producing no harmful emissions. The industrial electric boiler is equipped with an integrated steam dryer as standard, ensuring steam quality suitable even for the most demanding industrial applications. When connected to Fingrid's reserve markets, the boiler enables optimization of heating costs while generating additional revenue through capacity compensation. Standard delivery capacities range from 500 kW to 5,000 kW, with custom solutions available up to 80 MW (80,000 kW).
Electric boiler for water heating
An electric boiler for district heating water is a compact solution for water heating, requiring no chimney and avoiding the need for complex environmental permitting. It is suitable for use as either a primary or secondary heat source in industrial applications. Standard delivery capacities range from 500 kW to 5,000 kW, with custom solutions available up to 80 MW (80,000 kW). The system enables optimization of heating costs through the use of spot market electricity pricing and participation in Fingrid's reserve markets, providing additional revenue through reserve capacity compensation.
Magnetic filters —
new product for district heating and steam lines.
Magnetic filters remove magnetic impurities (iron oxide, magnetite) from process streams — especially in district heating and steam systems. Effective protection for pumps, heat exchangers and valves against wear and deposits. Project-specific sizing.
Magnetic filter
Ferromagnetic impurities removed from the process stream. Less maintenance, longer equipment life.
District heating & steam lines
Pre-process filtration at pumping stations, heat exchanger protection, power plant water filtration, process water purification.
Less maintenance, better efficiency
Longer pump and heat exchanger life, lower pumping electricity consumption, reduced clogging risk.
Filters
District heating, liquid, gas and side-stream filters for industrial processes.
District heating filter
A district heating filter is installed on the suction side of the pump to prevent impurities from causing blockages and damage in pumps, valves, and heat exchangers. The filter is designed for demanding operating conditions, withstanding temperatures of 110-140°C and pressures of 6-16 bar. As standard, the filter is supplied with a cleanable stainless steel filter basket, available with mesh sizes ranging from 0.25 mm to 5 mm. A wide range of sizes from DN15 to DN400 is available to suit various district heating and industrial applications.
Liquid filter
The VM Liquid Filter is designed for the filtration of water, glycol, oil, and chemicals in process industry applications. The filter is installed on the suction side of the pump to prevent impurities from entering pumps, valves, and other process equipment. The spring-loaded, cleanable filter basket is manufactured from stainless steel and is designed for reliable long-term operation. Mesh sizes can be selected between 0.05 mm and 5 mm to suit the specific application and filtration requirements.
Gas filter
The gas filter is an industrial-grade solution designed for the removal of solid particles and impurities from gas streams.
Its robust construction and carefully selected materials enable reliable operation in demanding industrial environments. The gas filter is engineered for long service life and easy maintenance, helping to minimize downtime and maintenance costs. The solution can be integrated into an existing process or supplied as part of a larger system package, tailored to meet the customer's specific requirements.
Side-stream filter
The side-stream filter removes up to 99% of particles from 40 μm and above. Filtration is carried out through a side-stream circuit, allowing continuous operation without interrupting the main process. Its modular design enables fast and easy maintenance, while the filter element can be cleaned and reused, reducing operating costs and minimizing downtime.
Tanks
Feedwater, condensate, expansion and blowdown tanks — EN 13445 / PED 2014/68/EU, 0.5–100 m³.
Feedwater tank and thermal degasser
A feedwater tank ensures reliable and efficient operation of the water-steam cycle. The thermal deaerator effectively removes corrosion-causing gases, such as oxygen and carbon dioxide, from boiler feedwater. Lower gas concentrations help extend the service life of equipment throughout the water-steam cycle by reducing corrosion and improving overall system reliability.
Condensate tank
A condensate tank collects condensate generated in the process and enables its efficient reuse, improving energy efficiency and reducing overall system consumption.
The tank serves as the central component of the condensate recovery system, balancing flow rates from different process lines. Each condensate tank is custom-designed for its specific application, allowing seamless integration into the overall system while supporting reliable, long-term plant operation with minimal downtime.
Heat Exchangers
BEU, BEM and NEN shell-and-tube heat exchangers, diameter 150–900 mm, pressure classes 6–64 bar.
Shell-and-tube heat exchanger
Shell-and-tube heat exchangers are a traditional, robust, and long-lasting solution for heat transfer applications. The exchanger can be opened for cleaning, making maintenance straightforward and cost-effective. Low pressure loss reduces pumping power requirements and helps improve overall energy efficiency. We manufacture shell-and-tube heat exchangers in sizes ranging from DN150 to DN800, with lengths from 1,000 mm to 6,000 mm and capacities from 100 kW up to 100 MW (100,000 kW).
Oil flow heater
A flow heater is designed for pressurized applications where temperature has a direct impact on the viscosity of the pumped medium. U-shaped electric heating elements are mounted in a flange assembly to achieve the required heating capacity. The robust and service-friendly design, featuring an accessible and removable structure, ensures a long service life and simplified maintenance.
Sample Processing
SWAS sample stations and sample coolers for power plant water treatment.
SWAS sample station
A sampling station is one of the most critical components in power plant water chemistry monitoring. It enables continuous and reliable measurement of key water quality parameters at various stages of the process, which is essential for the safe, efficient, and reliable operation of the plant. By providing accurate real-time data, the sampling station helps ensure optimal water and steam quality, reduces the risk of corrosion and equipment damage, and supports the long-term performance of the entire process system.
Sample cooler
The VM Sample Cooler safely cools process samples from hot liquids and steam to approximately 20°C, enabling safe handling and accurate analysis. The unit is manufactured from durable materials: the shell is made of stainless steel (EN 1.4307) and the sample tube of acid-resistant stainless steel (EN 1.4404). Its simple, robust and maintenance-free design ensures reliable operation and ease of use. Complete sample cooler assemblies are also available, including mounting panels and drip trays for convenient installation.
Stations
Light and heavy fuel oil pump units 800–18,720 kg/h. Pumping and pre-heating stations.
Oil pump station
An oil pumping unit is designed for the filtration, pumping, and transfer of light or heavy fuel oil. The integrated basket filter prevents impurities from entering pumps and the process system, where they could cause blockages and operational issues. The filter features an accessible design for easy cleaning and maintenance. For heavy fuel oil applications, the unit can be equipped with a preheating system to ensure proper viscosity and reliable operation.
Turnkey delivery —
when you need it.
Engineering and custom design
Our in-house engineering capabilities enable a flexible approach. Extensive experience in metal fabrication combined with a thorough understanding of customer requirements ensures tailored solutions.
Electrical and automation installations
Installation services for supplied equipment are available on a turnkey basis whenever required.
Commissioning
Our specialists ensure smooth and reliable commissioning of your equipment and systems.
Spare parts and maintenance services
Long service life requires reliable maintenance support. We know the equipment we manufacture and provide service throughout its lifecycle.
Rental options
Rental solutions are available for selected products and applications.
Steel structures
Supporting steel structures for pressure equipment supplied as complete assemblies in accordance with EN 1090 standards.
Need a customized solution?
Contact us and we will design a tailored package for your application.
Request a quote →